If you were wondering how to enable SSH access on your shinny new Iomega Storecentre IX2-200, despite the limited amount of information available online explaining how to do this (& a few misleading websites that go through an unnecessary process of removing the drive & attaching it to a computer to edit the files to gain SSH access) it’s actually quiet easy by following these simple steps:

1. First login to the IX2-200 via the normal admin page.
2. Next browse to https://The_NAS_IP/support.html
3. Click “Support Access”
4. Check the box next to “Allow remote access for support (SSH and SFTP)”

IX2-200 Enable SSH

Now you have enabled SSH you can connect via SSH. You’ll need to use user “root”, if you use Linux already you’ll be thinking 😉

The password for “root” is soho and your normal admin user password for the web interface. So for example if your password is “Vigus1” then the root password will be “sohoVigus1”

Now remember while your enjoying your SSH access, support mode is still enabled. To continue enjoying SSH access with support mode switched off you will need to make a few more changes:

1. SSH to your IX2-200 and type the following to change the write permissions on the file sshd (start script for the ssh daemon):
cd /etc/init.d/
chmod u+w sshd
pico sshd

2. Next we need to make some changes to the sshd file:
vi sshd

3. Remove the four # (comments) from the following lines:
Note: If this is the first time you’ve used vi before just be careful (cheat sheet here), use the arrow keys to scroll around, use x to delete the character to the right of the curser & this sequence to exit saving changes:

escape
😡
return key 

before:

start() {
        echo -n "Starting sshd: "
        # /usr/sbin/sshd
        # touch /var/lock/sshd
        echo "OK"
}
stop() {
        echo -n "Stopping sshd: "
        # killall       sshd
        # rm -f /var/lock/sshd
        echo "OK"

after:

start() {
        echo -n "Starting sshd: "
         /usr/sbin/sshd
         touch /var/lock/sshd
        echo "OK"
}
stop() {
        echo -n "Stopping sshd: "
         killall       sshd
         rm -f /var/lock/sshd
        echo "OK"

Now go back into the web interface and disable the support mode. SSH should start automatically each time the NAS starts up. To test reboot your NAS via the power button or if you still have SSH open use the Debian (yes Debian, thats what it runs!) reboot command:

shutdown -r now

Now crack open a can of Stongbow as its your Bowtime! 🙂

Get yours on Amazon here: